Home » News & Insights » The Next Frontier of Solar: Why We Chose PEC-BC Technology

The Next Frontier of Solar: Why We Chose PEC-BC Technology

An Exclusive Technical Insight from Prof. Martin Green, Chief Scientist at Peakup Power

PEC-BC-2.png

For decades, the solar industry has focused on a singular goal: driving down the cost of mainstream crystalline silicon modules. Today, that goal has been achieved—but it has also left a critical gap in the market. While 90% of the world’s solar panels rely on foundational technology pioneered at UNSW, millions of square meters of rooftops and facades remain completely excluded from the solar transition.

Why? Because conventional glass modules are simply too heavy and too rigid.

At Peakup Power, we believe the next frontier isn't just about improving cell efficiency; it is about redesigning the architecture so solar can finally go where it was never allowed to go before. To achieve this, we have commercialized a unique second-generation lightweight module architecture built around two core pillars: Interdigitated Back Contact (BC) cells and our proprietary Planar Electrical Connection (PEC) technology.

Here, our Chief Scientist, Prof. Martin Green, shares the technical rationale behind this breakthrough.

Martin-1.png

1. Unlocking New Applications: The Lightweight Advantage

The most immediate impact of our technology is weight. At approximately 2.5 kg/m², Peakup Power modules are three to four times lighter than conventional glass modules.

This fundamental shift opens up three primary application scenarios:

Ageing Industrial Rooftops: Warehouses and factories that were never structurally designed to bear the weight of conventional glass modules can now integrate solar without costly structural reinforcement.

Building Facades (BIPV): Our modules can be directly attached to facade materials without the need for heavy sub-structures, perfectly balancing aesthetics and energy generation.

Vehicle Integration: The slim, lightweight design makes it ideal for integration into caravans, buses, lorries, and even trains, without disturbing the vehicle's aerodynamics or payload.

Installation is equally streamlined. On flat roofs, the modules can simply be glued down. For corrugated or uneven surfaces, we utilize a specially developed mounting sub-structure. Furthermore, with a 30-centimeter bending radius, the modules conform comfortably to slight curvatures, enabling seamless integration into complex architectural designs.

微信图片_20250702082510.jpg
Australia-pic.jpg

2. The Core Architecture: Why BC + PEC?

To achieve true flexibility and reliability, one must move beyond traditional module structures. We use Interdigitated Back Contact (BC) cells, which place both contacts on the rear of the cell. This eliminates front-side shading, delivering the highest possible efficiency and an elegant, all-black aesthetic for building integration.

However, back-contact cells require an equally advanced connecting method. This is where our proprietary PEC (Planar Electrical Connection) technology comes in.

Instead of using hundreds of meters of traditional solder ribbons, PEC technology contacts the cells on the rear through a highly patterned, ultra-thin copper sheet. This flexible copper foil not only connects the cells in series (building up the module voltage) but does so with remarkable elegance, entirely eliminating the mechanical and electrical stress points associated with conventional ribbon interconnects.

3. Redefining Reliability: Micro-cracks, Hotspots, and Moisture

By removing solder ribbons, PEC technology fundamentally solves some of the industry's most persistent durability challenges:

Resistance to Micro-cracks: Ribbon interconnects concentrate mechanical stress, making modules vulnerable to micro-cracks during flexing. The copper sheet in PEC technology contacts the cells at multiple points. If a micro-crack occurs, the current simply reroutes around it, preventing power loss and failure.

Superior Hotspot Management: The BC cell structure itself spreads concentrated areas of heat dissipation across the whole cell area. Furthermore, the full-area copper sheet acts as a highly efficient thermal conductor, rapidly drawing heat away from localized hot spots.

 The "Breathing" Module: In a groundbreaking design philosophy, our modules avoid overly rigid encapsulation. Silicon modules actually benefit from being semi-permeable to moisture, allowing acids and byproducts generated over their lifecycle to escape. This "breathing" mechanism, combined with the moisture resistance of silicon cells, ensures excellent long-term durability—a stark contrast to perovskite or CdTe technologies that require absolute, fragile sealing.

4. A More Sustainable and Cost-Effective Material Stack

The PEC architecture is not just a technical marvel; it is a significant leap forward in material sustainability.

Most conventional modules rely heavily on silver paste for cell contacting. With PEC technology, we need zero silver. Copper is significantly cheaper, more abundant, and highly conductive. Furthermore, our modules are 100% lead-free, eliminating the toxic heavy metal found in the solder of most other panels.

This transition ensures our technology is insulated from the volatility of silver prices while meeting the stringent environmental regulations of the European market.

5. Aesthetic Versatility

Beyond the standard all-black configuration (which offers the highest energy yield), our technology allows for architectural customization. Using a specially developed polymeric coloring technique, we can offer modules in red, blue, and yellow. While coloring reflects light and slightly reduces output (by 10–30%), it provides architects and building owners with unprecedented design freedom for BIPV applications.

The Future is Adaptable

The first 50 years of solar were about making the technology cheap enough to compete. The next 50 years will be about making it adaptable enough to fit everywhere.

Through the combination of BC cell architecture, PEC planar contacting, and lightweight composite framing, Peakup Power is not just building modules—we are building the infrastructure for a truly ubiquitous solar future.

Discover how Peakup Power’s PEC-BC technology can unlock the potential of your next project.  Contact our team at info@peakuppower.com.

Product Categories

Quick Links

Contact Us
Distributor
Partner

Copyright©2026 Jiangsu Peakup Power Technology Co., Ltd. Sitemap | Privacy Policy